SINTESI 3 / P is suitable on a wide variety of materials such as: terracotta, terracotta, cement, marble and non-polished natural stone. Whilst it can be applied directly on structured porcelain stoneware surfaces, it will normally be used after the application of primer products, such as: Linfocot, Kripton HS, Olio Dodici, etc ...
SINTESI 3 / P is a combination of various types of high-quality waxy emulsions with stain resistant properties, characterised by excellent wettability and high rooting capacity. In addition to a high resistance to traffic, it gives the floors a final satin appearance. Suitable for internal surfaces only.
IMPORTANT: For routine cleaning use Linea E7 AE detergent; do not use alcohols, acid-based, solvent or ammonia based cleaners.
Integrate and complete the treatment. Helps to increase stain protection. Demonstrates a very strong pearling effect. Allows for ease of cleaning. Ease of use. It does not emit harmful substances neither during application nor after. It gives a pleasant waxy appearance. It guarantees uniformity of results. It is pleasantly scented. Difficult to scratch. Simple to re-polish.
Mix well before using. Operate with temperatures between +15°C and +30°C. Avoid applying the product on very hot surfaces. After any application of primer primers, on a dry surface, apply the product SINTESI 3 / P, with the aid of a cotton cloth and scrub brush or wax dispenser. If necessary, apply a second coat in the same way. It does not require polishing. SINTESI 3 / P can also be used indoors, as an anti-dust on exposed brick surfaces, or on porcelain stoneware with a structured surface to prevent dirt from settling in the micropores of the material so as to simplify maintenance operations, without modifying the coloring surface. ORDINARY MAINTENANCE: use Mistrall or Oil & Clean detergent for each wash (see data sheets). EXTRAORDINARY MAINTENANCE: about once a year with Cottolux (see data sheets).
DILUTION: Ready to use. DUST-FREE TIME: 2 hours. WALKABLE: 4 hours. TIME OF REACTION: 48 hours. YIELD: Approximately 18-28 sqm/l per coat. HOW TO CLEAN EQUIPMENT: Wash with water STORAGE: Closed in the original packaging, in a cool place, away from frost and UV rays, it retains its properties for at least one year
APPEARANCE: liquid. COLOUR: milky. ODOUR: aromatic. PH (at 20°C): 8,7 SOLUBILITY IN WATER: total. SPECIFIC WEIGHT: 1,018 kg/l FLASH POINT: >60°C.
The product is not classified as hazardous pursuant to the provisions set forth in EC Regulation 1272/2008 (CLP) (and subsequent amendments and supplements). No danger symbol is required on the label It must nevertheless be kept out of the reach of children and must not be disposed of in drain water, in order to protect the environment. We nevertheless advise you to adopt good work practices.