PERLA is an oil-wax for the finishing protection of parquet and other wooden artefacts. While the first coat of PERLA NEUTRA NEUTRA has the function of impregnating the substrate in depth, the second provides surface protection. Applied after base oil (COROLLE), it delivers a soft appearance, resistance to foot traffic, and good protection against dirt and stains of various kinds. IMPORTANT: For routine cleaning do not use alcohols, acid-based, solvent or ammonia based cleaners.
The NEUTRA NEUTRA is intended to give a light, as-sanded look.
BIANCO SPORCO is an off-white/grey tone from the same range.
Simple in normal use. Enhances the natural configuration of the wood. It does not alter the natural breathability of the products. It soaks in depth, returning a high refractive index. Easily restorable. Available in different chromatic shades. Good coverage can be achieved. It gives a pleasant waxy effect. Re-polishable with extreme ease
Mix well before and during use, if using colored PERLA make sure there is no deposit on the bottom. Operate with temperatures between + 15 ° C and + 30 ° C. Avoid applying the product on very hot substrates. Evenly spread a first coat of PERLA with fleece, wax spreader or cotton cloth if it is a manual application, or with a roller for industrial application. Leave to dry for 2/4 hours (at 20 ° C), then polish with white, beige or red scotch brite. Wait at least 2 hours and apply a second coat again. Wait 4-6 hours to polish in the same way. After at least 3/5 days, to simplify ordinary and extraordinary maintenance operations, it is possible to apply the RILUX product (see sheet). If the protective treatment with COROLLE product is performed (see sheet), follow the instructions for the second coat of PERLA. ORDINARY MAINTENANCE: use Mistrall rinse aid diluted at 1-2% for each wash (see sheet). EXTRAORDINARY MAINTENANCE TO BE PERFORMED ABOUT ONCE A YEAR: - on Rilux finish: with Rilux product (see sheet). - on Perla finish: we recommend the execution by a professional, with Perla product.
DILUTION: Ready to use, if necessary it can be diluted with Chemsol- C. DUST-FREE TIME: 4 hours. WALKABLE: 8 hours. DRYING: 72 hours. TOTAL DRYING: 3 weeks. YIELD: Approximately 20-30 sqm/l per coat. HOW TO CLEAN EQUIPMENT: Wash with Chemsol-C or white spirit. STORAGE: Closed in the original packaging, in a cool place, away from frost and UV rays, it retains its properties for at least one year.
APPEARANCE: dense liquid. COLOUR: White ivory. ODOUR: aromatic. SOLUBILITY IN WATER: insoluble. SPECIFIC WEIGHT: 0,876 kg/l FLASH POINT: < 23°C.
Hazard statements: H225 Highly flammable liquid and vapour. H319 Causes serious eye irritation. H317 May cause an allergic skin reaction. H412 Harmful to aquatic life with long lasting effects. EUH208 Contains: para-tert-Butylcyclohexyl acetate mixture: -3-(3-(2H-benzotriazol-2-yl)-5-tert-butyl-4- hydroxyphenyl)propionyl--hydroxypoly(oxyethylen e); -3-(3-(2H-benzotriazol-2-yl)-5-tert-butyl-4- hydroxyphenyl)propionyl--3-(3-(2H-benzotriazol-2 -yl)-5-tert-butyl-4-hydroxyphenyl)propionyloxypoly May produce an allergic reaction. Precautionary statements: P501 Dispose of contents / container to . . . P102 Keep out of reach of children. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P280 Wear protective gloves/ protective clothing / eye protection / face protection. P101 If medical advice is needed, have product container or label at hand. P370+P378 In case of fire: use . . . to extinguish. Contains: ROSIN Reaction mass of Decanedioic acid, bis(1,2,2,6,6- pentamethyl-4-piperidinyl) ester and Decanedioic acid,(1,2,2,6,6-pentamethyl-4-piperidinyl) methyl ester CAS 41556-26-7 + CAS 82919-37-7