product review overlay image

Product Description

PROFILE AND INTENDED USE NATURAL PARQUET is a next generation product for the protection of indoor wooden floors. Completely colourless after application, it penetrates deeply into the wood fibres to make them impermeable to water, grease and stains, thanks to the size of the particles (fluorinated resins) and oil. The peculiarity of NATURAL PARQUET is to combine a natural end result without altering the tone of the wood while providing water, oil and dirt repellent properties. It can be used on common oak, teak, oak, fir, larch, elm, chestnut, walnut, etc... IMPORTANT: for regular cleaning, do not use alcohols, or acid, solvent or ammonia baseddetergents.

Easy application. Creates a natural and soft finish. It does not release harmful substances during application or after. Maximum effectiveness after 6 days. Non-flammable. Easy to restore. Quick-drying. High resistance to light. The treatment protects against water and oil. Delays ageing.

INSTRUCTIONS Mix before and during use. Operate at temperatures between + 10 ° C and + 30 ° C. Avoid applying the product on very hot surfaces. Spread a first coat with fleece, wax spreader or brush for manual applications, or by spray or roller if it is an industrial application. Carry out, where possible, a movement parallel to the grain of the wood by applying the product evenly and maintaining a consumption of about 14-18 sqm/lt. Wait at least two hours (at 22°C), then sand with sandpaper 320/400 grit or scotch brite to smooth the surface. Vacuum the dust. Perform a small drafting test on a few strips (if the wood fiber is very thick, we recommend waiting more time between the 1st and 2nd coat, even 24 hours), otherwise continue the treatment in the same way but with a lower product consumption (about 18-22sqm/lt. ). After waiting for 2 hours, you can pass the monobrush with a red pad to smooth the surface. Apply a third coat, following the same procedures, with the addition of Indur K-34 (see chart) to increase the hardness and anti-stain properties of the surface. If you intervene on brushed, planed or serrated artifacts, after the first coat of NATURAL PARQUET, with a dry surface, it is sufficient to pass the green or red disk to lower the wood fiber. You can complete the treatment with Primo Legno, Natur-10, Forwood, Nature Fur (our varnish). ORDINARY MAINTENANCE: at each wash, use Mistrall rinse aid detergent diluted at 1-2% (see sheet). EXTRAORDINARY MAINTENANCE: about once a year with Nutro-Parquet or Nutro-Opax (see sheets).

DILUTION: Ready to use. CATALYSIS REPORT (last coat): 10/1,2. POT-LIFE: 3 hours. DUST-FREE TIME: 1 hour. WALKABLE: 2 hours. TIME OF REACTION: 6 days. YIELD: Approximately 18-24 sqm/l per coat. HOW TO CLEAN EQUIPMENT: Wash with soap and water. STORAGE: Closed in the original packaging, in a cool place, away from frost and UV rays, it retains its properties for at least one year.

APPEARANCE: liquid. COLOUR: milky. ODOUR: aromatic. PH (at 20°C): 8.2. SOLUBILITY IN WATER: total. SPECIFIC WEIGHT: 1,034 kg/l FLASH POINT: > 60°C. VOC (Directive 2004/42/EC): Minimal build woodstains. VOC given in g/litre of product in a ready-to-use condition: Limit value: 130,00 (2010) VOC of product: 59,59

The product is not classified as hazardous pursuant to the provisions set forth in EC Regulation 1272/2008 (CLP) (and subsequent amendments and supplements). Hazard statements: EUH210 Safety data sheet available on request. No danger symbol is required on the label It must nevertheless be kept out of the reach of children and must not be disposed of in drain water, in order to protect the environment. We nevertheless advise you to adopt good work practices

-

To see Linea Natural Parquet being used in demonstration videos please click:

DC098 sampling

Specifications

Product Code
2 C7
Weight
1.25kg

Delivery & Returns

For orders placed before 2pm weekdays the APC delivery should be during the next working day. The exception being more remote parts of the UK as well as the islands in which case delivery will be 2 to 4 days. Orders placed after 2pm should be thought of as coming next working day + 1. 

Returns of unopened product need to be arranged directly with our office. It is expected that the canisters will be undamaged as well as unopened. The original packaging box must be used and any empty space filled with an appropriate padding. Dane Care will arrange the collection and the cost of this (normally about £15 plus vat) will be deducted from the refund. 

Linea Natural Parquet hybrid oil finish range

In stock as of Friday. Check before ordering if the availability is low. (149 Available)

Product Code 2 C7