APILEGNO protects exterior wooden surfaces from atmospheric agents and the attack of mold and fungi. It gives a waxy satin finish enhancing the natural beauty of the wood. It can be used both on raw wood and as a maintenance product. APILEGNO is ideal on windows and facades. Not suitable for surfaces that will be walked on.
INSTRUCTIONS:
Mix before and during use.
Use when the weather is dry and the temperatures is between + 10 ° C and + 30 ° C. Avoid applying the product on very hot surfaces, during strong wind or possible rain.
On a clean dry surface apply 1 coat of APILEGNO with a brush, felt oilpad applicator or Woca lye applicator. Wait about 2 hours. If necessary, sand with 320/400 grit paper to smooth the surface. Aspirate and apply another coat of product in the same way. Wait 2 hours and, if necessary, apply a third coat. The finishing coat must necessarily be neutral. To treat larger surfaces it can be used by spraying. In this case, wear suitable clothing for personal protection. If used by immersion it can also be diluted in water in different proportions, but in any case not higher than 50%. It can be used as a reinforcement on other types of impregnating agents (after removing parts that are not well anchored to the substrate). AVAILABLE COLORS: Neutral.
After treatment, protect from water for at least 24 hours.
ORDINARY CLEANING: use Linea AE detergent for washing (see data sheets).
MAINTENANCE: approximately once every 2/4 years re-apply with Apilegno.
COMPOSITION Linseed oil, beeswax, propolis, waxy resin dispersions, essences, u.v.a. filters, self-levelling agents, water.
PROPERTIES DILUTION: Ready to use.
DRYING: 2 hours. Full curing: 48 hours.
YIELD: Approximately 10-20 sqm/l per coat.
CLEANING EQUIPMENT: Wash with soap and water.
STORAGE: Closed in the original packaging, in a cool place, away from frost and UV rays, it retains its properties for at least one year
CHARACTERISTICS APPEARANCE: liquid. COLOUR: second folder. ODOUR:pleasantly scented. PH (at 20°C): 28,7 SOLUBILITY IN WATER: total. SPECIFIC WEIGHT: 1.019 kg / lt. (neutral version) FLASH POINT: > 60°C. VOC (Directive 2004/42/EC): Interior/exterior trim varnishes and woodstains, including opaque woodstains. VOC given in g/litre of product in a ready-touse condition: Limit value: 130,00 (2010) VOC of product: 34,37
HEALTH The product is not classified as hazardous pursuant to the provisions set forth in EC Regulation 1272/2008 (CLP) (and subsequent amendments and supplements). Hazard statements: EUH210 Safety data sheet available on request. No danger symbol is required on the label It must nevertheless be kept out of the reach of children and must not be disposed of in drain water, in order to protect the environment. We nevertheless advise you to adopt good work practices.